In the Public DNS Server field, enter the IP address of the DNS server (the value 0.0.0.0 cannot be used).ģ. For example, is the domain zone for the domain name Enter the symbol * (asterisk) if all the domain zones are serviced by a DNS server.

In the Domain Zone field, you can specify a domain zone. In the Domain Zone Forwarder section, click Add to create a new entry. To configure the IP address of the DNS server, go to System> DNS. By default, the Enable Default SNAT parameter is enabled.Ģ.

To display this option in the upper left corner, click Show Advanced Settings. Make sure that the Enable Default SNAT option is enabled in the Configuration> Network> Interface> Trunk menu (to provide users of the local network with internal IP addresses from accessing the Internet). In the IP Address field, enter the static IP address provided by the provider, in the Subnet Mask field the subnet mask and in the Gateway field the IP address of the gateway. In the Edit Ethernet window that will open, in the IP Address Assignment section, install Use Fixed IP Address. Go to Configuration> Network> Interface> Ethernet to configure a static IP address on the device's WAN interface (click on the WAN interface configuration entry and then click Edit ). Let's take a closer look at setting up the ZyWALL USG hardware gateway to connect to the Internet when using a static IP address.ġ. In ZyWALL USG, it is possible to configure MAC address cloning if there is a MAC address binding in the provider's network (the provider requires a specific MAC address in order to provide access to the Internet). Configure the static IP address in Configuration> Network> Interface> Ethernet, and configure the DNS server in Configuration> System> DNS.

How to set up a hardware ZyWALL USG series gateway to connect to the Internet when authorization is not used, and the provider only issued a global static IP address and a DNS server address?Ĭonnect to the web configurator of the ZyWALL USG hardware gateway.

Zyxel usg110